The important parameters in LED 1 forward current If: it refers on the light emitting diode forward current value when the standard light.In actual use ought to selected according to the needs of IF in three.6& # below IFm 183.
The 2 positive voltage VF: parameters are shown in the table working voltage is given in the forward current under.Generally on the inside IF = 20mA that presents itself.Light emitting diode forward voltage in kids of 1.4 ~ 3V VF.In the outside world when the temperature rises, the VF will lose.The characteristics of 3.V-I: led the relationship between voltage and current, the forward voltage is smaller than a certain value (called threshold), current is small, no light.When the voltage exceeds a certain value, the forward current with voltage increases rapidly, directed.
4 luminous intensity IV: light emitting diode luminous intensity is usually fingering line (on cylindrical luminous tube refers to the axis direction of the luminous intensity).If in the direction of radiation intensity (1 / 683) W / Sr, then led 1 candela (symbol CD).Because with the general LED luminous associated with the two small, the actual common candle (light intensity candela, MCD) as unit.5.LED light emitting angle: - 90 - + 906 spectral half width: it expresses the spectral purity of the luminous tube.7 half value angle 1 / 2 and 1 / 2 perspective: refers to the luminous intensity values for the axial intensity values of half of the direction and luminous axial (normal) angle.8: according to entire LED light-emitting solid angle conversion of angle, best known as plane angle.
The 9 perspective: is the term for the LED luminescence maximum angle, according to the angle of view is different, different application, also known as light angle.10 and a half to 0 and shape: maximum luminous intensity associated with the angle between the / 2.Strictly speaking, is the maximum luminous intensity value and the maximum luminous intensity values corresponding for the angle / 2.LED encapsulation technology resulted in biggest bank emitting angle is not the normal 0 intensity values, introducing the angle of deviation, mean maximum luminous intensity corresponding angle and the angle one of the normal 0.11 maximum DC forward current IFm: allowed maximum DC forward current.
More than this value can be damaged diode.Maximum reverse voltage 12 VRm: allows the maximum reverse voltage.This value is exceeded, light emitting diode end up being the breakdown.13 work environment TOPM: light emitting diode working environment temperature range.Below or above this temperature range, light emitting diode will not work, greatly reduce the efficiency of.14 allows power Pm: allows to LED ends of positive DC voltage and the current through it is product or service of the maximum.