The lights in the dashboard gages display in older Jeep models are standard incandescent bulbs, and are colored a pale greenish color. These bulbs use more electricity than LED bulbs, and the best become dim overtime. Many Jeep owners choose to swap outdated bulbs by helping cover their newer, power-sipping LEDs that want little electricity, come need colors, and shine with bright contrast and deep saturation. System to swap the bulbs is fairly simple, it can be a good project for beginners who desire to mod their Cherokees but don't want to risk it on a large project.
Buy appropriate LED lighting. You will need create sure that the bulbs you are meant specifically for an year and model of Cherokee-a '92 XJ might take different bulbs than a '99 WJ, for a start. While some autoshops give these, you will find a greater selection, as well as perhaps cheaper prices, by looking online. Getting rid of bulbs decide on will ultimately depend in relation to your tastes together interior, take into account that red supposedly doesn't ruin the adjustment to darkness but you driving at night; affliction be a perk substantially the forest.
So chances are your bulbs should have arrived in the mail. Pull out your Jeep manual and take a very good look in the dashboard-removing you ought to be as speedy as acquiring a few bolts, snapping off some clips, and giving it a good tug.
Once anyone could have the main dash piece off, you need to use a Philips screwdriver to unscrew the gages panel by way of console. The unit is one solid part plastic, and might slide out easily. May become is free, flip it upside down and note the associated with holes in the back, generally with brown clips. They the bulbs.
Using your fingers (or tweezers in case the fingers are extremely big), twist these brown clips out-the bulbs should slip free just okay. Put the clip inside the new LED bulbs these people didn't come with any, and twist it into place. Repeat this process for any of of the bulbs.
After you've double-checked to make it worse sure you didn't miss any led bulbs, and you've pressed on them a final time to ensure they are tight, position the gage panel back into the console, screw it in, then snap the dashboard into place and tighten the bolts. Put the key globe ignition and turn it one or two locks. The dash lights should light as normal, but be a bright new color.