With high power LED the development of technology, high power LED used increasingly widely fan, high power LED wall lamp is would like a super wash application, we take the wall lamp LED wash details:
Wash wall lamp originated in English wash wall, translated into Chinese became wash wall light. Wall lamp and that LED to wash linear LED project-light lamp and so on, because its shape is elongated, also some people to call that LED line lamp, is primarily used for building decoration lighting with, and once outline the outline of large buildings, the technical parameters and LED project-light lamp broadly similar, relative to LED project-light lamp round structure, LED to be able to the structure of wall lamp bar radiator appear more good deal after a little.
A: LED wall lamp was standard parameters
Wall lamp and fence LED wash tube has a lot of similarities, let us come to its parameters are introduced:
Wash works of art of the voltage Leds for 220 V and 110 V, 36 V, 24 V, 12 V, several, and then we are choosing power supply
Time compensates attention to your corresponding current.
2) working temperature:
Because wall lamp normally used in washing outdoor is more, so this parameter a lot important, on the requirements on the temperature is high, the general situation we request of the outdoor temperature in 40 + 60 -can be effective. But wall lamp is used to wash heat better aluminum shell, so the advantages of general wall lamp can wash meet the requirements.
3) LED lamp bead number:
General wash the associated with wall lamp LED 9/300 mm, 18/600 mm, 27/900 mm, 36/1000 mm, 36/1200 mm.
4) protection level:
This to be able to wash the important parameters of your wall lamp, also affect current guardrail tube quality important indexes, we must carry located on the strict request, we the actual planet outdoor use, requirements in waterproof level above IP65 are superb. Also require a related voltage, capability disintegrate, everywhere temperature resistance, resistance to burn, impact resistance aging level
5) control mode
Wall lamp is Leaded to wash already have two types of control ways: internal control and external control two kinds. Internal control isn't an external controller, design personnel management system design in the wall lamp 'inside, the extent for this effect is can't rework. External control is external controlled. Its effect is the main control buttons can adjust and customise the effect. Usually in large engineering above, the customer requirements determines his effect, we use external control this strategy. There are also many washes directly include the wall DMX512 control plan.
6) color specification:
Two sections, section 6, 4 section 8 period, full-color color, colorful color, red, yellow, green, blue, purple, white color
7) light Angle: light Angle usually have narrow (20 degrees or so), (50 degrees or so), wide (around 120 degrees) three, at present, high power LED wash wall lamp (narrow Angle) the farthest distance projection for the effective 20 to 50 meters;